Velocity Meters (page 1 of 1)

Speedtech Water Flow Meter
Click on item to see a larger image

Measure water flow in: rivers, streams, irrigation canals, ocean flows, sewage flows. Measure airflow in: ventilation shafts, air conditioning conduits, chimney flues, air ducts controls.

FEATURES: Measures fluid flow, air flow, & temp ,Reads in mph, km/h, m/s, & knots, Current, max & average speed ,Current, min & max temp, Wind chill temp (when appropriate) . Collapsable 2 meter carbon rod ,The end of the rod near the impeller houses a thermometer for true fluid temperature, Includes a 25mm air impeller and 60mm water impeller, Manual shutoff or automatic shutoff after 36 hours, Runs on one lithium battery (included), Large LCD display for an easy reading ,Weatherproof ,Threaded for tri/unipod.

ACCURACY: +/- 3% fluid speed; Temperature: +/- 1.25°F (+/- 0.7° C) ,RANGE: Fluid Speed: 0.2 to 40 mph (0.1 to 18 M/Sec) depending upon impeller; Temperature: -22 to 212°F (-30 to 100 °C) ,RESOLUTION: 0.3 km/h; 0.2 mph; 0.2 knots; 0.1 M/Sec ,TEMPERATURE MODES: Minimum, maximum and current temperature, Wind chill factor, AUTO OFF: After 36 hours (for extended measurements), OPERATING MODES: Current, maximum and average fluid speed OPTIONAL UNITS: Knots, mph, km/h, m/s, °F or °C ,POWER: 1 - CR2032 Lithium Battery (included), MEASURES: 2.4" x 1.3" x 4.7" 62 x 32 x 120mm (Head Unit)

Part # Description Price

     
     
 

Swoffer 2100 Current Meter
Click on item to see a larger image

This easy to use, robust current meter consists of a handheld digital display connected to a fiber-optic sensor and is available with 3 rod configurations - a top set wading, combination, and Telescoping rod. Top set wading rods are designed to be used while wading in streams, waterways and channels. Combination rods are designed to measure flows in faster, deeper water or from low bridges or a boat. Telescoping wands which are supplied with the sensor on an short boom are designed for reaching shallow and partially obstructed channels such as sewers.

The basic principle of the Swoffer fiber-optic sensor is simple and unique: Multiple bundles of fiber-optics, assembled into a propeller driven rotor, gate a beam of infrared light from a photo diode to a photosensitive transistor producing electronic pulses. These pulses, generated by the propeller rotor over a precisely measured amount of time, are directly proportional to water velocity. The cable to the display can be extended to over 1000ft. All rotor parts are easily replaceable in the field and spares are provided with every new instrument.

Average water velocity in both m/sec and ft/sec can be viewed on the standard 2100 Handheld Display which is also used to calibrate the fiber-optic sensor. Also available is the Model 3000 Datalogging Indicator which allows the operator to input all measurement data usually kept on a clipboard while crossing a stream. It figures the flow (Q) and can be downloaded to a PC with the included software.

Part # Description Price

     
 

Model 2100 Current Velocity Meter
Click on item to see a larger image

Read stream velocity directly from 0.1 to 25 feet (.03 to 7.5 meters) per second Data displayed in either feet or meters per second Three selectable pre-set display update times. 90 second maximum Powered by a single standard 9V battery. Uses the efficient, propeller-driven Photo-Fiber-Optic sensor pioneered by Swoffer in the 1970’s Precision quartz crystal controlled electronics provides accurate, precise data in all flow conditions.

Part # Description Price

     
 

MAIN CATALOGUE INDEX

Call Toll Free in Canada and USA
Tel: 1-800-561-3600 Fax: 1-506-458-2200
All prices subject to change without notice
Visa/Mastercard accepted