Skidding Cone
Click on item to see a larger image

The skidding cone will prevent logs from being stopped by roots, stumps or residual trees. It also protects your valuable trees along the path from being damaged.Operator safety is enhanced, as the cone prevents sudden stops caused by logs getting caught in an obstacle.Made of high-performance steel yet it is light enough for the worker. It’s 20" opening lets you haul large logs or bunches of smaller logs. Use the skidding cone to skid logs directly behind your ATV with the pulling plate, or bring logs to the trail using a corner block and Kevlar™ rope.

Deviation Pulley and Self Release Cable
Click on item to see a larger image

This allows you to bring tree trunks that are inaccessible for the ATV nearer to the road.Also used to free a tree from its wrong position.Installed on the cable,the release cable automatically disengages the cable from the pulley at the right moment and allows the load to be deviated.

Kevlar Cable
Click on item to see a larger image

With a breakpoint of 9000 lb (4082 kg), our Kevlar™ rope is well suited to the rigors of logging. Kevlar™ fibers inside the rope resist shockloading and are protected from abrasion and wear by an outer braid of polyester.Lightweight, resistant to rot and mildew, synthetic ropes are stronger and more user-friendly than wire ropes. Due to its minimal stretching (3% at breakpoint), there is minimal whiplash it should ever break or come undone. Make the most of it by installing it in a storage reel. Available in lengths of 100'.

5’ Kevlar Cable with Splice
Click on item to see a larger image

Kevlar cable 3/8” diameter x 25’ allowing to pull loada up to 9000 lbs.

Choker Chain
Click on item to see a larger image

The 7’ choker, is essential to install the cone.Once around the trunk,the choker
must pass through the opening in the cone and be attached to the hook at the end of the kevlar cable.